Dazon Raider Extreme 1100D Service Manual download pdf (Page 55)

Raider-Classic 150 (Oil-cooled&Internal Gearbox): Service Manual (single/ double-seat) EEC Version;3.0 Feb..2005

b) Inspect if there is any abrasion or damage on the driven plate;

Measure the outer diameter of the driven plate pulley hub.

c) Inspect if there is any abrasion or damage on the movable driven

plate;

Measure the inner diameter of the movable driven plate.

d) Inspect if the groove of the guide pin is worn.

 Replacement of Driven Plate Bearing

a) Remove the needle bearing from the driven plate.

b) Remove the circlip from the driven plate.

c) Drive the ball bearing out.

d) y some grease on the new ball bearing.

e) Drive the ball bearing into the driven plate with its front face

upwards.

e) Assemble the circlip.

g) Apply grease evenly on the inner wall of the driven plate.

Service limit 33.94mm

Service limit 34.06mm

 If the driven plate needle bearing and ball bearing are loose, damaged, or have

some unusual sound, they should be replaced.

 The removed bearing can’t be reused.

 The removed bearing can’t be reused

 Use the prescribed grease.

1 2 ... 50 51 52 53 54 55 56 57 58 59 60 ... 78 79

No comments

Dazon Raider Extreme 1100D Service Manual Page 55