Dazon Raider Extreme 1100D Service Manual download pdf (Page 56)

Raider-Classic 150 (Oil-cooled&Internal Gearbox): Service Manual (single/ double-seat) EEC Version;3.0 Feb..2005

h) Drive the new needle bearing into with its mark upwards.

i) Apply some grease around the bearing.

 Installation

a) Remove the grease on the driven plate;

Assemble the oil seal.

Apply a little grease on the O-ring.

b) Assemble the movable driven plate into the driven plate;

After applying some grease on the roller and guide pin, assemble

them into the driven plate hole.

c) Install the oil seal collar;

Remove the excessive grease.

d) Assemble the clutch on the left crankcase.

3.19.5 Transmission Belt

 Inspection

a) Remove the left crankcase cover;

Inspect if the transmission belt is chapped or worn;

Measure the width of the belt.

Service limit 19.0mm

b) Replace the belt if its width is less than the above limitation.

 Use the s

ecial tool.

 No grease on the movable face of the driven plate.

 When replacing, you must use the OEM part fo

the correct fit.

1 2 ... 51 52 53 54 55 56 57 58 59 60 61 ... 78 79

No comments

Dazon Raider Extreme 1100D Service Manual Page 56