Dazon Raider Extreme 1100D Service Manual download pdf (Page 74)

Raider-Classic 150 (Oil-cooled&Internal Gearbox): Service Manual (single/ double-seat) EEC Version;3.0 Feb..2005

d) Apply an ample amount of grease to the bearing and reinstall

it with a bearing tool, making sure that they go in straight;

If the bearing isn’t straight, damages to the hubs can occur.

e) Install the seals into the hubs;

It is recommended to apply a small amount of grease to the

lip of the seal;

If the retention spring is in bad shape, replace the seal with a

new one

5.7 Seat

a) Remove all the nuts and bolts underneath the seat rail.

b) Remove the seat.

5.8 Steering Shaft

a) Remove the nuts on the steering block, and grease the inside of the steering block periodically.

b) Loosen the steering shaft and clamp nut on the steering gear box.

c) Remove the steering shaft.

5.9 Steering Gear Box and Ball Head

a) Remove the four bolts of the LH&RH clamp nuts on

the steering gear box.

b) Remove and check the ball head dust cover on the

steering gear box for wear.

c) Check the steering cover on both sides of the steering

gear box and grease the ball head.

d) Fill the steering gear box with Grease after cleaning

the dust; It is recommended to replace the ball joint if

it is loose or not smooth.

5.10 Throttle & Brake Pedal

a) Remove the throttle, throttle pedal and axle nut.

b) Check the throttle and brake pedal for signs of wear;

1 2 ... 69 70 71 72 73 74 75 76 77 78 79

No comments

Dazon Raider Extreme 1100D Service Manual Page 74