Dazon Raider Extreme 1100D Service Manual download pdf (Page 46)

Raider-Classic 150 (Oil-cooled&Internal Gearbox): Service Manual (single/ double-seat) EEC Version;3.0 Feb..2005

b) Inspect the condition of the needle bearing. It should be replaced if there is any damage.

c) Inspect if there is any abrasion or damage on the contact surface

between the outer clutch component and roller;

Inspect if there is any injury on the roller;

Inspect if there is any distortion on the spring. If the damage is

serious,it should be replaced.

d) Measure the inner diameter of the flange clutch. It should be

replaced when the diameter is more than 27.94mm.

 Installation

a) Install the spring, roller and top pin on the body of the clutch.

b) Align the dowel pin on the flange clutch with the hole on the

clutch body, and then install the dowel pin.

c) Apply some thread locks on the outer clutch component bolt, and

tighten them.

d) Apply some oil on the needle bearing and drive gear, and then put

the outer clutch component on.

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 78 79

No comments

Dazon Raider Extreme 1100D Service Manual Page 46