Dazon Raider Extreme 1100D Service Manual download pdf (Page 36)

Raider-Classic 150 (Oil-cooled&Internal Gearbox): Service Manual (single/ double-seat) EEC Version;3.0 Feb..2005

c) Tighten the oil pump plate screws;

After assembling, gently turn the oil pump shaft, and make sure

the oil pump can turn smoothly.

 Oil Pump Installation

a) Install the oil pump on the crankcase.

b) Tighten the oil pump positioning bolts.

b) Align the oil pump driving gear with the oil pump shaft unfilled

corner, and then assemble the drive gear and chain.

c) Install the partition board, and tighten the bolts.

d) Install the starting reduction gear and starting clutch;

Assemble the gasket and dowel pins.

e) Assemble the right crankcase cover-positioning bolt;

Assemble the trigger winding and stator coil;

Tighten the right crankcase cover-positioning bolt.

 Before installing, fill the oil pump with oil.

 When installing the oil pump on the crankcase, the arrow of the oil pump body

must be upwards.

 The bolt should be gradually diagonally tightened in two or three steps.

 After finishing the installation, inspect for any oil leakage.

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 78 79

No comments

Dazon Raider Extreme 1100D Service Manual Page 36